Anuvrat Industries

Medium Coated all position electrode for work of structural importance with medium penetration, Soft arc & low spatter, Easy to detach slag. It can be used in both AC & DC Current.
Structural & Building Construction, Auto Bodies & Railway Wagons, Grills General Fabrication Vessels, Tanks, Pipelines, Bridge, Ship, Traillers, Building up of shafts, Boilers.

A medium heavy coated iron powder, low hydrogen type of electrode, yielding 0.50% Ni in the weld metal. The weld metal is of radiographic quality and has good notch toughness down to - 60 C. The deposition efficiency is 115% approx.Recommended forweldingheavysections, restrained joints, requiring good notch toughness down to-50 CandforweldingGr.60,Gr.65ofSA-515&SA-516 

A heavy basic coated, low hydrogen iron powder type of electrode with excellent welding characteristic. The weld metal is ductile, crack resistant and is of radiographic quality, Easy to operate in all position efficiency is approx 115%.Suitableforweldingofpressurevessels,Restrained joints,Penstocks,Shipconstruction,Boilers,Bridgesetc.

A low hydrogen, iron powder type electrode for welding steels having tensile strength upto 70kgf/mm². Ideally suited for welding fine-grained steels, high tensile steels used in bridges, penstocks, tanks, etc. The weld metal possesses excellent toughness at sub-zero temperatures down to minus .Welding of grain refined steels having tensile strength upto 70kgf/mm . Q&T steel, HSLA steel, Structure fabrication, Penstocks, Tanks, Pressure vessels etc.

ANUVRAT TIG ER316 is a solid wire for TIG welding, available in bright finish, gives smooth flow, stable arc and spatter free under optimum welding conditions. It gives radiographic quality weld deposit. The weld metal has excellent resistance to intergranular corrosion even at elevated temperatures. It is ideal for welding stainless steel of similar composition in wrought or cast form and for overlay application to resist heat and corrosion. It is suitable for number of industries like rayon, dye, paper, chemical, fertilizer, petrochemicals, etc.

ANU BOND E308-16 is a stainless steel electrode yielding a weld metal of 19Cr-10Ni. The weld metal displays good resistance to cracking, corrosion and scaling. This stainless steel welding rod is ideally suited for welding stainless steel materials of similar composition like AISI 301, 302, 304, 308, etc.

Medium Coated all position electrode for work of structural importance with medium penetration, Soft arc & low spatter, Easy to detach slag. It can be used in both AC & DC Current.
Structural & Building Construction, Auto Bodies & Railway Wagons, Grills General Fabrication Vessels, Tanks, Pipelines, Bridge, Ship, Traillers, Building up of shafts, Boilers.

A normal carbon 19/10 type of stainless steel electrode with controlled ferrite. The weld metal has good resistance to cracking, corrosion and scaling upto 800 C. The weld metal is of radiographic quality. Suitable for welding stainless steels of AISI 301, 302, 304 and 308 composition. For fabrication of equipments used in food industry. Hospital apparatus,Pharmaceutical equipment etc.

This is a basic heavy coated low hydrogen iron powder type electrode with excellent weld charcteristics. Very smooth arc, medium penetration & low spatter, easy to remove slag. The weld metal is ductile & crack resistant & is of radiographic quality. It is easy to operate in all position & efficiency is approximately 115%. 
Ship building, Boiler, Pump & Compressor, Blast Furnace steel work, Bridges, Rail wagons, Earth Moving Equipment’s, Road Building Machinery, Tanks, Pressure Vessel, Penstocks, Atomic Reactor Shell. 

Basic coated, extra low hydrogen electrode ideally suited for welding high strength steels. Ni-Cr-Mo type weld deposit.  The weld metal is of radiographic quality and possesses excellent strength combined with good toughness. Ideal for welding Typical applications include storage tanks for liquefied gases like Ammonia, distillers in coke oven batteries, petrochemical industries, DMR 249 Grade Steel.

This is a basic heavy coated low hydrogen iron powder type electrode with excellent weld charcteristics. Very smooth arc, medium penetration & low spatter, easy to remove slag. The weld metal is ductile & crack resistant & is of radiographic quality. It is easy to operate in all position & efficiency is approximately 115%. 
Ship building, Boiler, Pump & Compressor, Blast Furnace steel work, Bridges, Rail wagons, Earth Moving Equipment’s, Road Building Machinery, Tanks, Pressure Vessel, Penstocks, Atomic Reactor Shell. 

A low hydrogen, iron powder type, all position electrode yielding a creep resistant weld metal containing 2.25% and 1% Mo. The weld metal is of radiographic quality and has creep resistance upto 600 C. Recommended for welding 2.25% Cr. 1% Mo steels, used in Boilers, Oil refineries power plant setc.at serve temp. upto 600 C. 

A low hydrogen, iron powder type, all position electrode yielding a creep resistant weld metal containg 1.25% Cr and 0.5% Mo. The weld metal is of radiographic quality and has creep resistance upto 550 C recommended for welding 1 Cr to 0.5 Mo and 0.5 Cr - 0.5 steels, used in Boiler,Superheaters,Pipelines,Oilrefineriesetc.