Anuvrat Industries

ANU BOND E6013 is a Rutile Based Medium Coated all position electrode for work of structural importance with medium penetration. It features Soft arc with low spatter & Slag is easy to detach. These feature helps in reducing the cleaning cost post welding.

It can be used in both AC & DC Current.

ANU BOND 6013 is a Rutile Based Medium Coated all position electrode for work of structural importance with medium penetration. It features Soft arc with low spatter & Slag is easy to detach. These feature helps in reducing the cleaning cost post welding.

It can be used in both AC & DC Current.

ANU BOND 7024 A Super heavy coated, iron powder type electrode ideal for welding

mild steel structures, plant machinery, etc. High metal recovery of 150% reduces

welding time and increases the output. Weld metal is sound and is of radiographic

quality. Some typical applications include mild steel structures, heavy

columns, shipbuilding, locomotives, girders, boilers, etc.

ANU BOND 6010 is a light coated cellulosic type electrodes. The electrodes are

characterized by a deeply penetrating, forceful, spray type arc and readily removable,

thin, friable slag. Ideally suited for welding in all positions including vertical down.

The weld metal possesses good mechanical properties. Ideal for stove pipe technique

and faster welding. Welds are of radiographic quality. It is ideally suited for root

pass welding of API 5L X42 and X46 grades. Typical applications include welding of

A medium stainless steel electrode depositing an extra low carbon weld metal containing 19 Cr, 12Ni, and 3 Mo. The weld metal is resistance to inter - crystalline corrosion cracking, hot cracking and chemical corrosion against sulphuric acid etc. The higher molybdenum content reduces the susceptibility to pitting ; improve creep strengths at elevated temp. And practically eliminates cracking as the weld cools form molten stage to room temp. Redry electrodes at 300 one hour for better results.It is use for welding of AISI 317L type SS plant as well as 316L similar type of material for joining of stainless steel to low alloy and carbon steel. For sever corrosion applications involving sulphuric acid and their salt.

ANU BOND  E383 is rutile-basic coated electrode for welding fully austenitic highly corrosion resistant stainless steels (Sanicro 28, Uranus B28 ) of the same composition or lower alloyed. Good weldability in all positions, except vertical down, stable arc, good slag removal, regular finely rippled weld beads. Due to its alloy composition, high Mo-content and Cu, the weld metal is suited against attacks by phosphoric- and sulfuric acids, it shows a high resistance against pitting and stress corrosion in chloride containing media. It is used at operation temperatures up to 400°C.It is Non-synthetic electrode depositing low carbon 28Cr-31.5Ni-3.7Mo-1Cu, fully austenitic weld metal. Weld metal exhibits excellent resistance to corrosion in non- oxidizing media like Sulfuric acid, Phosphoric acid, etc. The elements C, P and S are maintained at low levels to eliminate hot cracking & fissuring problems in weld metal. A soft and smooth arc, which is easy to strike and re-strike. E a s y slag detachability and well-rippled weld beads.  The weld metal is of radiographic quality.