Anuvrat Industries

ANU BOND 7141 is an electrode for low heat input welding of austenitic manganese steel. It produces a weld deposit having excellent crack resistance on a variety of steels particularly austenitic Mn steels. The metal exhibits a pleasing operating characteristics with good slag detachability 
For welding of Manganese Steel Casting having MN : 11.5 – 14.05 % C: 1.1 TO 1.4 % SI :1.00 % max,13% Mn steel rail crossing where minimum 15 GMT life of the rail crossing is required. For welding bullet proof arm our quality steel plate. For welding hard or unidentified steels. For heavy, crack free buildups. The electrode can be used for dissimilar joints consisting of high manganese and other steels. 

Anu Bond Nano Alloy 07 is austenitic “Lo-Temp” Electrode for joining heavy sections of manganese steels to themselves or to other steels. for positional joining and repair of heavy sections of manganese steel parts used in construction, earthmoving and mining industry, such as shovel, excavators and dragline buckets, Joining of Hadfield steels, alloy steels, case hardened steels, cast steel and difficult to weld steels. Alloy has an excellent abrasion and impact resistance. Excellent for crack free joints in high alloy and difficult to weld steels including heavy armour plates.

Earth moving equipment, conveyor buckets Oil expeller worms, Shear’s blades and croppers. Bamboo Chipper knives, coupling, conveyor parts, Tractor wheels, steel casting. Shafts, Axels

ANU BOND HARD-550  is medium heavy coated rutile type, air hardening type electrode. The weld deposit givs approximately 550 BHN hardness. The Weld metal is grindable and recommemded fro application involving maximum hardness as required.Used for Earth moving equipment, conveyor buckets Oil expeller worms, Shear’s blades and croppers. Bamboo Chipper knives, coupling, conveyor parts, Tractor wheels, steel casting. Shafts, Axels.

ANU BOND HARD 650 is a specially formulated all position electrode depositing dense and spatter free alloy to resist very high abrasion. This alloys can be used on steels , hadfield manganese steels & malleable Iron.Anu bond Hard 600 is used for welding Plow Shares, Bucket Teeth, Pug mill crushers, Coal chutes, dipper teeth, screw conveyor, crusher plates, HEMM Parts etc

This is medium heavy coated low hydrogen, air hardening type iron powder electrode. The weld deposit is extremely hard, sound and non machinable. The low hydrogen enables the electrode to be used in high carbon and high sulphur steel without including under bead cracking or porosity. The electrode is recommended for hardfacing where severe conditions of abrasion and friction accompanied by moderate impact exist the weld deposit is finished by grinding.Earth moving equipment, conveyor buckets Oil expeller worms, punching dies, mine Rail Disintegrator hammer, shears blades, caterpillar treads Drill bites, muller ploughs, dipper teeth impellers crane wheels, Cane cutting knives, Sprockets.

This is medium heavy coated rutile type, air hardening type electrode. The weld deposit gives approximately 350 BHN hardness. The Weld metal is grindable and recommended from application involving maximum hardness as required. 
Earth moving equipment, conveyor buckets Oil expeller worms, Shear’s blades and croppers. Bamboo Chipper  knives, coupling, conveyor parts, Tractor  wheels,  steel casting Shafts, Axels.